Onn soundbar factory reset-SoundbarStereo

A properly functioning Onn soundbar is one of the most important components of the home theater experience. If the soundbar does not work properly, it can be frustrating to watch movies and television shows.

Many soundbars do not have a display or multiple controls that would help identify the problem, so troubleshooting can become a trial and error process. Here are the simple steps of onn soundbar factory reset.

Onn Soundbar Not Working

A factory reset may be your best option if your soundbar is not working correctly after trying some diagnostics and checks. As a result, the device will be reset to its original factory settings. You can follow the steps in the soundbar manual.

You can be frustrated if your Onn soundbar isn’t working, but there are easy fixes to get it working again. The most common cause of problems is a connection that isn’t snug and secure. Also, settings problems can create annoying problems, but these can easily be corrected.

Spend some time examining the cables, connections, and settings if the soundbar is not working properly.

Reset to Factory Settings

1. Hold and press the SETUP button

2. Click and release the OK button.

3. Click and release the number #0

An entertainment system (TV, DVD, SAT, AUX)

The Master is programmed to control it Volume Feature.

The mute button.

There is a red indicator light

The light will blink twice and then go out.

As long as the red indicator remains lit

(approximately four seconds)

The button should be released.

It will be indicated by a red light

flash twice.

How do I fix my Onn sound bar? 

Here are some fixes to try if your Onn soundbar doesn’t produce any sound.

  1. In addition, look at the manual for your Onn soundbar to make sure that your cables are properly seated.
  2. Find your output settings in the audio menu of your TV. Change your audio settings there.

Where is the reset button on my soundbar? 

The Soundbar can be reset by following these steps

  1. For a system reset, press and hold the + (volume up) button, the power button, and the input select button for more than five seconds.
  2. Ensure that the AC power cord is unplugged.
  3. Turn the unit on by plugging the AC power cord back in again.

What does the green light mean on Onn soundbar? 

In order to see the blue light, you must press it again. If you would like to use Bluetooth, you must press it again.

How do I set up my Onn sound bar?

For a flashing blue indicator light on the soundbar, press and hold the source button for 3 seconds. Select the Bluetooth search function on your device. Your device should discover the soundbar that is called “Onn 36′′ 5.1 soundbars”.

How do I get my Onn soundbar to work on my TV?

Locate an aux port on your TV and the Onn soundbars by using the audio output port on your TV. Connect the other end of the aux cable with the aux port on the TV set. Connect the other end to the aux port on the Onn soundbars. Once both ends of the aux cable are connected, go to the settings on your television.

Why is no sound coming from my soundbar?

It’s important to turn up the TV volume if you’re using an analog connection. If your TV is set to “variable” and you’re not hearing sound from the soundbar, try turning up the TV volume. Regardless of how loud the soundbar is, if the TV is turned down all the way, you will not hear any sound.

How do I pair my Onn speaker?

You can turn on Bluetooth by going to Settings. A new Bluetooth device can be paired by clicking “Pair new device”. When the Onn headphones appear in the list, tap them.

How do I connect my Onn surround sound to my TV?

Series 2020 of Onn TV

  1. Press the MENU button on your remote control.
  2. Select Raw from the menu under Sound > Digital Audio Output.
  3. Select Surround Sound from the menu.